Contents |
Many research workers, hydraulics specialists and engineers have used scale models for over a century, in particular in towing tanks. Manned models are small scale models that can carry and be handled by at least one person on an open expanse of water. They must behave just like real ships, giving the shiphandler the same sensations. Physical conditions such as wind, currents, waves, water depths, channels and berths must be reproduced realistically.
Manned models are used for research (e.g. ship behaviour), engineering (e.g. port layout) and for training in shiphandling (e.g. maritime pilots, masters and officers). They are usually at 1:25 scale.
Port Revel has chosen to apply the similitude law of William Froude (1810-1879) for its manned models. This means that gravity is considered to be preponderant over the other forces acting on the hull (viscosity, capillarity, cavitation, compressibility, etc.).
The different aspects of similitude may thus be defined as follows:
Similitude of shape: The model has exactly the same geometric shape as the real ship. This means that all the dimensions of the real ship are divided by the same factor, the scale factor. The designers of Port Revel chose a scale of 1:25, so:
S(L) = 25
In this similitude, the proportions are kept (the ratios between the various dimensions of the ship are identical). This is also the case with the block coefficient. Furthermore, the angles are a length ratio, so they are also identical to the original ones. The scale factors of the areas and volumes are deduced from this, i.e.:
S2(L) = 252 = 625
S3(L) = 253 = 15 625
Similitude of mass: The model used for shiphandling training must not only resemble the original but also move in the same way as the original when subjected to similar forces. Moreover, the density of the lake water is almost the same as the density of sea water. Consequently, the scale factor for the mass and displacement is the same as that for the volumes, i.e.:
S(M) = S3(L) = 253 = 15 625
Similitude of forces: If the external forces on the model are in similitude, like the shapes, masses and inertia, the model's movement will be in similitude. It can thus be shown that the forces must be at the same scale as the masses and weights, so:
S(F) = S(M) = 253 = 15 625
Similitude of time: In agreement with Froude's law, the time scale is the square root of the length scale, so:
S(T) = S1/2(L) = sqrt(25) = 5
Similitude of power: Similarly, it can be shown that:
S(P) = S7/2(L) = 257/2 = 78 125
In conclusion, by choosing a scale of 1:25 for the lengths and by complying with Froude's law, the engineers at Sogreah – Port Revel built models 25 times smaller, operating 5 times more slowly, but as the distances are 25 times less, things occur 5 times faster. The ships are 78125 times less powerful.
While the models must be in correct similitude, this is not enough. Other factors can affect the correct reproduction of the manoeuvres, such as the field of vision, on-board equipment and wind.
40 years' experience have shown that students quickly learn how to control the models just as they do the real ships that they are used to manoeuvring.
Those who have trained on both claim that scale models are complementary to electronic simulators. While manoeuvres with currents, waves, tugs, anchors, bank effects, etc. are reproduced more accurately on scale models, numerical simulators are more realistic when it comes to the bridge environment.